Thermally Conductive Materials

Engineering Materials - Selection Guide
Controlled Volatility - Thermally Conductive Silicone

NuSil ID	Cure System	Work Time	Mix Ratio	Comments
CV-2942	PT Addition	2.5 HR	20:1	22) 1.0 W/mK, 4) Primed Lap Shear 375 psi (2.6 MPa)
CV-2943	Tin Condensation	2 HR	100:0.2	22) 1.2 W/mK, 3) Primed Lap Shear 475 psi (3.3 MPa)
CV-2946	PT Addition	2 HR	15:1	22) 1.5 W/mK ,4 ) Primed Lap Shear 160 psi (1.1 MPa)
CV-2948	Tin Condensation	2.5 HR	100:0.2	22) 2.0 W/mK, 3) Primed Lap Shear 150 psi (1.0 MPa)
CV-2960	PT Addition	1.5 HR	10:1	22) 0.8 W/mK, 4) Primed Lap Shear 205 psi (1.4 MPa), Low Viscosity
CV-2961	PT Addition	2 HR	10:1	22) 0.8 W/mK Low Viscosity, 3) Primed Lap Shear 205 psi (1.4 MPa), Low Temp
CV-2963	PT Addition	2 HR	20:1	Primed w/CF1-135, Contains Boron Nitride
CV-2964	Cures with heat	5 hours	1:1	Two-part, white, thermally conductive, low viscosity silicone elastomer
CV1-2960	PT Addition	2 HR	10:1	25x10(-4) cal/cm-sec-C* (1.04 W/mK) Low Viscosity thermally conductive
CV2-2946	Platinum	3 H	20:1	Thermally conductive silicone. Cures with the addition of heat
CV3-2646		4 H	100:0.5	Two-part tan-coloured electrically conductive RTV silicone